800GP: Concrete Form Release (General Purpose)
BLUE BEAR® Concrete Form Release 800GP was developed for general construction with an emphasis on wood forms. Our high-yield, concentrated formula is non-staining, leaves a paintable surface and contains no petroleum distillates. Concrete Form Release 800GP is forgiving, has excellent wetability properties and achieves fine detail with little to no dusting.
- Provides a clean release with wood, metal, plastic, styrene, urethane and fiberglass forms
- Average coverage is 2,500 square feet per gallon.
- Biodegradable
DIRECTIONS:
Seasoning forms: When using Concrete Form Release 800GP for the first time, season form by applying a generous coating and allow to dry. Then spray again for use.
Surface preparation: If form had other release or oil previously applied, scrape particulates and clean form to a usable condition. Spray a generous coating and allow to dry. Spray again for use.
MIXING: Add one part Concrete Form Release 800GP to 20 parts clean water (1:20). Shake or mix the solution until consistent throughout. Once diluted, solution may begin to separate if left undisturbed for a week or longer. Shake or mix again until consistent throughout.
APPLICATION: Concrete Form Release 800GP can be applied by all conventional methods, though spray application is recommended. Remove puddles and allow to dry thoroughly. Proper application will result in fine detail with little to no dusting. Do not use or apply in a steady rain. Do not apply to forms still wet from rain or water used in cleanup. Use above 32ºF (0ºC). Any spills or overspray can be cleaned with water