Aqua•Wash™ (Water-Based Ink Remover)
Extend the life of your screens with Aqua•Wash Water-Based Ink Remover! Aqua•Wash saves screens by cleaning dried, water-based inks from screens that could not otherwise be cleaned and reused - without harsh chemicals. It removes all types of water-based inks, virtually eliminates mesh ghosting and also acts as a screen opener while still on the press. Spend more time printing and less time cleaning!
- Tough on high-pigment inks
- Low-odor, non-caustic and drain safe
- One gallon cleans up to 240 screens
DIRECTIONS: Spray or pour a small amount onto screen. Scrub screen with dedicated Biggee™ scrub pad or nylon brush. Repeat on back of screen image. Rinse both sides of screen with pressured water. Note: Do not use to keep water-based inks wet in the screen for continuous printing.
Q: What kinds of emulsions are recommended for use with Franmar cleaners?
A: Most emulsions will work with Franmar's line of cleaners. Keep in mind that Franmar's environmentally friendly cleaners require the use of water during the clean-up process, so having an emulsion with some water resistance is important.
Q: Franmar cleaners are softening my emulsion. Why?
A: One possible cause for this is that the emulsion is not fully cured. Another possibility is that it's not actually the cleaner softening the emulsion, but the water that is used to rinse the screen. The emulsion used needs to have some water resistance to it.